Skip Nav

Contact Us

Centaur Horse Walkers Corp

Thank you for your interest in Centaur Horse Walkers Corp. Complete the form below to send us an email, or simply give us a call. We're looking forward to working with you.

  • Mira Loma, CA 91752
  • 951-202-2032

Thank You!

Your message has been sent.

Oops, message not sent.

Please make sure fields are complete.

Centaur Horse Walkers / Horse Walkers

Horse Walkers


Keep Your Horses Fit and Engaged with Automated Horse Walkers

2 Horse Walker

Standard Features

  • Twenty enamel colors Color Palette
  • Adjustable diameter 24 ft. to 30 ft. on all 2 horse
  • All thermally protected motors
  • All galvanized steel covers
  • 5 ft. X 5 ft. Square bases
  • Quick release mechanisms on each arm
  • 2 Leads with protective covering and heavy duty swivel bull snaps
  • Primered undercoat and enamel finish
  • Head structure & arms made of square steel for added strength
  • Base constructed of 1/4 inch thick angle iron
  • Double V-Belt drive (950 lbs. Pull power)

Model 201 Single Speed
$4,195.090 F.O.B. + Tax

  • Expandable working diameter 24 ft. to 30 ft.
  • 1 Speed both Directions
  • Upgrades to a 4 Horse Walker
  • Quick Releases
  • Steel Base Cover
  • 2 Leads included

Model 200 Variable Speed
$4,795.090 F.O.B. + Tax

  • Expandable working diameter 24 ft. to 30 ft.
  • Variable Speed both Directions
  • Upgrades to a 4 Horse Walker
  • Quick Releases
  • Steel Base Cover
  • 2 Leads included

Optional: Programmable touch screen system.

This information is accurate as of date of publication, but is subject to change without notice.

4 Horse Walker

Standard Features

  • Twenty enamel colors Color Palette
  • Adjustable diameter 24 ft to 30 ft on all 4 horses
  • All thermally protected motors
  • All galvanized steel covers
  • 5 ft x 5 ft Square bases
  • Quick release mechanisms on each arm
  • 4 Leads with protective covering and heavy duty swivel bull snaps
  • Primered undercoat and enamel finish
  • Head structure and arms made of square steel for added strength
  • Base constructed of 1/4 inch thick angle iron
  • Double V-Belt drive (950 lbs pull power)

Model 401
$4,695.090 F.O.B. + Tax

  • Expandable working diameter 24 ft to 30 ft.
  • 1 Speed both directions
  • Quick releases
  • Steel base cover
  • 4 Leads included

Model 400
$5,295.090 F.O.B. + Tax

  • Expandable working diameter 24 ft to 30 ft.
  • Variable speed both directions
  • Quick releases
  • Steel base cover
  • 4 Leads included

Model 400 Heavy Duty
$6,995.000 F.O.B. + Tax

  • Working diameter 40 ft.
  • Variable Speed both directions
  • Lead quick releases
  • Steel base cover
  • 4 Leads included

Optional: Programmable touch screen system.

This information is accurate as of date of publication, but is subject to change without notice.

5 Horse Exerciser

Standard Features
$4,695.090 F.O.B. + Tax

  • Twenty enamel colors.
  • Diameter 40 ft.
  • All thermally protected motors.
  • All galvanized steel covers.
  • Quick release mechanisms no each arm.
  • Primered undercoat and enamel finish.
  • 5 Leads with protective covering and heavy duty swivel bull snaps.
  • Head structure and arms made of square steel for added strength.
  • Base constructed of 1/4″ thick angle iron.
  • Double V-belt drive ( 900 lb pull power).

Model 500
$7,895.00 F.O.B. + Tax

  • Expandable working diameter 40 ft.
  • Variable speed both directions
  • Quick releases
  • Steel base cover
  • 5 Leads included
  • Optional 60 ft diameter for additional $800

The overall structural design of the 6 Horse Centaur Hot Walker consists of a 8 5/8″ X 1/4″ wall vertical upright shaft which has a chain drive reduction of 5 to 1. We use 100 chain with 1 1/4″ pitch.

The four support structures are made of 2 1/2″ X 2 1/2″ X 1/4″ heavy walled angle steel. The base legs are made of 2 1/2″ X 2 1/2″ square steel (1/4″ thick walls). The arms are 20’ long and are made of 3″X3″ 2 1/2″X 2 ½” tubing (1/4″ thick walls) with a quick release mechanism on each arm with a lead attachment for your horse. The walking diameter is 40 feet. Optional Upgrade to 60 feet.

The drive system is powered by a 2 HP motor, single phase 220 Volt. The walker speed is controlled by using a remote control panel. An infinite range of speeds can be reached by simply adjusting the control panel dial. The Hot Walker can go forward and reverse. Seeds can vary from a slow walk to a gallop or canter.

The walker is designed so that the main drive belts will slip at a predetermined amount of pull. The operator can change the amount of pull from practically zero up to almost 400 pounds. The arms are approximately 9’6″ above the ground which tends to minimize the problem of a rearing horse. The entire drive system is housed in a steel cover of 18 gauge. You have 20 colors to choose from. The unit is designed with your horse’s safety in mind.

The total weight of each unit is 1825 pounds; total height is 10’6″.

Optional: Programmable touch screen system.

This information is accurate as of date of publication, but is subject to change without notice.

6 Horse Walker

Standard Features

  • Twenty enamel colors.
  • Diameter 40 ft.
  • All thermally protected motors.
  • All galvanized steel covers.
  • 5 ft x 5 ft square bases
  • Quick release mechanisms no each arm.
  • Primered undercoat and enamel finish.
  • 6 Leads with protective covering and heavy duty swivel bull snaps.
  • Head structure and arms made of square steel for added strength.
  • Base constructed of 1/4″ thick angle iron.
  • Double V-belt drive ( 900 lb pull power).

Model 600
$8,995.00 F.O.B. + Tax

  • Diameter 40 ft.
  • Variable speed both directions
  • Quick releases
  • Steel base cover
  • 6 Leads included
  • Optional 60 ft diameter for additional $1,000

The overall structural design of the 6 Horse Centaur Hot Walker consists of a 8 5/8″ X 1/4″ wall vertical upright shaft which has a chain drive reduction of 5 to 1. We use 100 chain with 1 1/4″ pitch.

The four support structures are made of 2 1/2″ X 2 1/2″ X 1/4″ heavy walled angle steel. The base legs are made of 2 1/2″ X 2 1/2″ square steel (1/4″ thick walls). The arms are 20’ long and are made of 3″X3″ 2 1/2″X 2 ½” tubing (1/4″ thick walls) with a quick release mechanism on each arm with a lead attachment for your horse. The walking diameter is 40 feet. Optional Upgrade to 60 feet.

The drive system is powered by a 2 HP motor, single phase 220 Volt. The walker speed is controlled by using a remote control panel. An infinite range of speeds can be reached by simply adjusting the control panel dial. The Hot Walker can go forward and reverse. Seeds can vary from a slow walk to a gallop or canter.

The walker is designed so that the main drive belts will slip at a predetermined amount of pull. The operator can change the amount of pull from practically zero up to almost 400 pounds. The arms are approximately 9’6″ above the ground which tends to minimize the problem of a rearing horse. The entire drive system is housed in a steel cover of 18 gauge. You have 20 colors to choose from. The unit is designed with your horse’s safety in mind.

The total weight of each unit is 1825 pounds; total height is 10’6″.

The working diameter is 40’.

Optional Upgrade: Working diameter of 60’ $1,000.00 plus tax.

Optional: Programmable touch screen system.

This information is accurate as of date of publication, but is subject to change without notice.

Specifications

Motor and Drive Unit:

¾ and 1 hp electrical motor (optional). All motors are thermally protected with an automatic reset unit incorporated into the motor.

Body Cover:

Sturdy 18 gauge galvanized steel cover with door on side to allow access to the switches, electrical motor and drive system.

Basic Colors:

There are 18 basic enamel colors to choose from. All models are primered prior to painting. Additional colors $100.00 extra. Ranch logo on 2 sides $150.00 extra. View color options here.

Body Frame:

The frame of all the models are composed of 2 ½” angle iron that has been bead welded approximately 1/8″ wide.

Drive Unit:

The drive assembly is driven through an electric motor which is incorporated with a speed reduction gear box. The speed reduction is done through a gear box reduction system incorporated with a variable speed sheave unit, and two v-belts for pulling power.

Speeds:

Centaur makes two horse walker models: 1) single speed at 3 ½ rpm’s, that goes forward and reverse; 2) variable speed control unit which goes from 2 rpm up to 6 rpm and any rpm between the two ranges, also forward and reverse.

Arms:

All models come with two adjustable lengths of arms depending on the users choice. There are 24ft. and 30ft. adjustments. The arms are constructed of 2 ½” tubular steel. The height of the arms from the ground is 8ft. 6″. Each arm comes equipped with a quick release mechanism and lead with a snap.

Head Section:

The horse walkers come equipped with a solid or folding head, constructed of 3″ square steel.

Electrical Specifications:

The unit can be connected to any 110 or 220 Volt electrical outlet. An additional charge of $75.00 for 220 Volt. 20 amps required at walker.

Walker
Options :
  • Extra long leads
  • Custom colors
  • Pin Striping
  • Ranch logos
  • Miniature horse walkers
  • 6 horse walker

Warranty:

All new machines are guaranteed to be free of manufacturing defects and structural failure for one year from date of sale.

Electrical wiring outside the machine for control is not guaranteed as it is subject to interference and interruptions from causes not the fault of the equipment.

Charges will be made for service calls relating to problems outside of our warranty. For out of state and out of country purchases, we request all payments in advance which do include a freight charge.

Installation charges are discussed with each client.

Centaur Corporation can put in electrical lines for any installations with regard to the walker. A licensed electrician is suggested for any electrical work needed. Centaur can supply you with an electrician if you so desire. Centaur’s California contractor’s license number is: A.B. 486161.

Installation & Delivery

Delivery:

Delivery Charges within continental United States – Hawaii, Canada, Mexico, South America & European Countries will be quoted.

Foundation:

A) CONCRETE PIER INSTALLATION
$300.00 for 4 post holes labor & concrete. In normal soil, NO rocks (extra for rocks, add $25.00/hole).

B) CONCRETE SLAB INSTALLATION
$725.00 for 6’X6’ slab and anchors, labor & installation included. (If rocky, add $25.00/hole).

Electrical:

$500.00 electrical installation for the first 50’ to electrical breaker. Over 50’ cost is $15.00 per foot, trenching, electrical material, and labor included. TRENCHING FOR ELECTRICAL LINE IS FOR NORMAL SOIL (EXTRA CHARGE FOR ROCK TRENCHING, $45.00/HOUR). Remote On/Off Switch (optional) – $75.00

Complete Installation:

Call the Centaur office for your discounted quote on both electrical and concrete installation. LOCAL installations ONLY.

Utility Disclaimer:

Centaur is not responsible for any underground utilities during trenching or post hole installation. Repairs will be charged at time and materials.

Required for Machines:

1 – 20 AMP, (or 40 AMP for 220-V power input) dedicated circuit breaker. (Horse/Hound Walker is only system to be on breaker)

Maximum Electrical Run:

225 Feet from 20 AMPs of power.

Access Road Conditions:

Minimum 8 feet wide by 10 feet high. Must be able to enter with truck and 15’ service trailer.

Pad area for walkers must be level prior to installation. 5 feet by 5 feet must be level for placement of miniature horse walker base.

Installation charges are discussed with each individual client.

Centaur’s California contractor’s license number is: A.B. 486161.

Repair Costs for 2 Horse and 4 Horse Walkers

Rate for Vehicle & Driver:

Service Rate of $35.00 per hour for drive time, plus $1.00 per mile (for vehicle) from our factory to the clients facility and return to our factory. This is based on location of Ranch.

*Tear down HW at Ranch $65.00 per hour. California Rates

Field Inspection:

Field Inspection of a Hot Walker is $75.00. (Based on Ranch location). This is not included in the above vehicle rate.

This covers the initial inspection of Hot Walker and estimates for repairs.

**FEE FOR DRIVING, MILEAGE, INSPECTION AND ESTIMATE IS TO BE PAID AT THE TIME THE SERVICE IS RENDERED.** $500.00

Field Repair Costs:

Field Costs are $65.00 per hour for labor. Parts are extra, see parts cost sheet. Field welding is $85.00 per hour. (Minimum 1 hour)

Shop Costs:

Shop costs are $65.00 per hour for labor. Parts are billed separately, with tax applied.

Terms:

Note: All clients are billed state sales tax, on parts ONLY.

**REPAIR WORK TO BE PAID WHEN HOT WALKER IS RETURNED TO RANCH.**

Contact Us

Please use the form below to send us an Email. You can also reach us at:
951-202-2032 (Cell), 951-685-7337 (Office) or 1-800-962-8050 (Toll Free).
We look forward to hearing from you.

  • 5761 Ridgeview Ave
  • Mira Loma, CA 91752