Centaur Horse Walkers / Mini Horse Walkers

Mini Horse Walkers


Don’t Forget the Little Guys! We Offer Miniature Horse Walkers, too!

Mini Horse Walkers

Standard Features
  • Twenty enamel colors.
  • All thermally protected motors.
  • All steel covers.
  • 4 Extra adjustable long leads with swivel snaps or 6 leads depending on model choice.
  • Primered undercoat and enamel finish.
  • Head structure and arms made of square steel for added strength.
  • Pull power – approximately 675 pounds

Options

  • 4 or 6 Horse Walkers
  • Foundations and pads
  • Electrical Installation
  • Hot walker fence enclosures
  • Programmable touch screen system

4 Horse Walker
Model 400MSV – Solid Head
$3,895.00 F.O.B. + Tax

  • Working diameter is 30 ft.
  • Variable speed both directions
  • Steel base covers
  • 4 extra long adjustable leads for horses

4 Horse Walker
Model 400MFV – Folding Head
$3,995.00 F.O.B. + Tax

  • Working diameter is 30 ft.
  • Variable speed both directions
  • Steel base covers
  • 4 extra long adjustable leads for horses

6 Horse Walker
Model 600MSV – Solid Head
$6,575.00 F.O.B. + Tax

  • Working diameter is 40 ft.
  • Variable speed both directions
  • Steel base covers
  • 6 extra long adjustable leads for horses

Specifications

Motor and Drive Unit:

1.5 hp d.c. electrical motor. All motors are thermally protected.
Maximum speed: 10 mph.

Body Cover:

Sturdy 18 gauge steel cover with door on side to allow access to the electrical motor and drive system.

Basic Colors:

There are 20 basic enamel colors to choose from. All models are primered prior to painting. Additional colors $100.00 extra. Ranch logo on 2 sides $150.00 extra.

Body Frame:

The frame of all the models are composed of 2 ½” angle iron that has been bead welded approximately 1/8” wide. Machine weighs approximately 1,000 lbs, when fully assembled

Drive Unit:

The drive assembly is driven through an electric motor, which is incorporated with a speed reduction gear box.

Speeds:

Centaur makes only variable speed mini walker models which goes from 0 rpm up to approximately 7 rpm and any rpm between the two ranges, also forward and reverse.

Arms:

4 horse walker has an arm length of 15 ft. Long. A 6 mini walker has an arm length of 20 ft. Long. The arms are constructed of 2 ½” tubular steel. The height of the arms from the ground is 4’. Each arm comes equipped with a quick release mechanism and lead with a snap.

Head Section:

The mini walkers come equipped with a solid or folding head (optional, $200.00 extra. 4 mini models only) constructed of 3” square steel.

Electrical Specifications:

The unit can be connected to any 110 or 220-volt electrical outlet. For 110-v wiring, a 20 Amp breaker is required at walker. For 220-v wiring, a 40 amp breaker is required at walker.

Walker
Options :
  • Extra long leads
  • Custom colors
  • Pin Striping
  • Ranch logos
Warranty:

All new machines are guaranteed to be free of manufacturing defects and structural failure for one year from date of sale.

*Deposit of 50% is required to start order *
Prior to shipment, balance must be paid in full
Major credit cards accepted ~ all prices are subject to local sales or use tax

For out of state and out of country purchases, we request all payments in advance, which do include a freight charge.

Electrical wiring outside the machine for control is not guaranteed as it is subject to interference and interruptions from causes not the fault of the equipment.

Charges will be made for service calls relating to problems outside of our warranty.

Centaur Corporation can put in electrical lines or any installations with regard to the walker.

Licensed electrician is suggested for any electrical work needed. Centaur can supply you with an electrician if you so desire, (in certain parts of the U.S. only).

Installation & Delivery

Delivery:

Delivery Charges within continental United States – Hawaii, Canada, Mexico, South America & European Countries will be quoted.

Foundation:

A) CONCRETE PIER INSTALLATION
$300.00 for 4 post holes labor & concrete. In normal soil, NO rocks (extra for rocks, add $25.00/hole).

B) CONCRETE SLAB INSTALLATION
$725.00 for 5’X5’ slab and anchors, labor & installation included. (If rocky, add $25.00/hole).

Electrical:

$400.00 electrical installation for the first 50’ to electrical breaker. Over 50’ cost is $12.00 per foot, trenching, electrical material, and labor included. TRENCHING FOR ELECTRICAL LINE IS FOR NORMAL SOIL (EXTRA CHARGE FOR ROCK TRENCHING, $45.00/HOUR). Remote On/Off Switch (optional) – $75.00

Complete Installation:

Call the Centaur office for your discounted quote on both electrical and concrete installation. LOCAL installations ONLY.

Utility Disclaimer:

Centaur is not responsible for any underground utilities during trenching or post hole installation. Repairs will be charged at time and materials.

Required for Machines:

1 – 20 AMP, (or 40 AMP for 220-V power input) dedicated circuit breaker. (Horse/Hound Walker is only system to be on breaker)

Maximum Electrical Run:

225 Feet from 20 AMPs of power.

Access Road Conditions:

Minimum 8 feet wide by 10 feet high. Must be able to enter with truck and 15’ service trailer.

Pad area for walkers must be level prior to installation. 5 feet by 5 feet must be level for placement of miniature horse walker base.

Installation charges are discussed with each individual client.

Centaur’s California contractor’s license number is: A.B. 486161.